[Assessment of occupational hazards and their prevention in the work of dental technicians during the COVID-19 pandemic]. / Ocena zagrozen zawodowych oraz ich profilaktyka w pracy techników dentystycznych w czasie pandemii COVID-19.

BACKGROUND: Work of a dental technician is associated with exposure to a number of harmful factors. We can distinguish: chemical, biological, physical and psychophysical factors. They contribute to many diseases, but not all of them are classified as occupational diseases. The main aim of the study was to assess the health hazards that occur in the workplace of a dental technician and their prevention during the COVID-19 pandemic. MATERIAL AND METHODS: An epidemiological cross-sectional study was conducted. A self-created questionnaire form containing 28 questions was used. The link to the survey was shared on social groups associating dental technicians. Participation in the study did not require logging in. During the data collection, the respondents' personal data were not collected and processed. RESULTS: 148 dental technicians participated in the study. The largest group were participants aged 21-25 (32%), the smallest group were people over 50 (6%). The most frequently occupied position was acrylic and plaster. More than 1/3 of those surveyed reported having allergies, most often to acrylic or metal. More than 20% of technicians reported experience of mechanical injuries several times a week or more. 17% of technicians declared professional burnout. 80% of technicians used protective clothing. Personal protective equipment was always used by only 22% of technicians, and as many as 29% of respondents never used the listed protective equipment. CONCLUSIONS: Not all dental laboratories were equipped with the necessary personal protective equipment. The most commonly used personal protective equipment included: disposable gloves, disinfectant liquid and extract. The COVID-19 pandemic contributed to a change in disinfection procedures in more than 1/3 of the respondents. 35% of them started using disinfection only after the outbreak of the pandemic, while most of the changes concerned the improvement of existing procedures. The length of work experience of technicians had an impact on exposure to stress and occupational burnout. Med Pr Work Health Saf. 2023;74(4):289-99.

The dental technician as a member of the hypodontia multidisciplinary team, with practical considerations for anterior restoration design.

Most patients seeking treatment for hypodontia will require prosthetic replacement of their missing teeth. This will be in the form of dentures, bridges and implant restorations. As these are created by one or more dental technicians who supports the clinical team, a close working relationship between these colleagues is likely to improve the quality of treatment outcome. This interaction will usually occur towards the end of the patient's treatment process, when definitive restorations are prescribed. However, appropriately trained and experienced dental technicians should be involved throughout the patient's treatment process as an integral part of the multidisciplinary team approach to effectively manage these patients.This paper describes the contribution of dental technicians to patient care with particular focus on communication between the restorative dentistry clinical team and the dental technician to improve the quality of anterior restorations. As missing maxillary lateral incisor teeth are a common presentation for this patient group, further technical detail relating to planning resin-bonded bridges for replacement of these teeth is included.

Revolutionising dental technologies: a qualitative study on dental technicians' perceptions of Artificial intelligence integration.

BACKGROUND: The integration of artificial intelligence (AI) in dentistry has the potential to revolutionise the field of dental technologies. However, dental technicians' views on the use of AI in dental technology are still sparse in the literature. This qualitative study aimed to explore the perceptions of dental technicians regarding the use of AI in their dental laboratory practice. METHODS: Twelve dental technicians with at least five years of professional experience and currently working in Malaysia agreed to participate in the one-to-one in-depth online interviews. Interviews were recorded, transcribed verbatim and translated. Thematic analysis was conducted to identify patterns, themes, and categories within the interview transcripts. RESULTS: The analysis revealed two key themes: "Perceived Benefits of AI" and "Concerns and Challenges". Dental technicians recognised the enhanced efficiency, productivity, accuracy, and precision that AI can bring to dental laboratories. They also acknowledged the streamlined workflow and improved communication facilitated by AI systems. However, concerns were raised regarding job security, professional identity, ethical considerations, and the need for adequate training and support. CONCLUSION: This research sheds light on the potential benefits and challenges associated with the integration of AI in dental laboratory practices. Understanding these perceptions and addressing the challenges can support the effective integration of AI in dental laboratories and contribute to the growing body of literature on AI in healthcare.

Assessment of hearing performance of dental technicians due to the professional noise exposure.

BACKGROUND: Some of the noise-intensive processes in dental laboratories include the finishing of crowns, bridges, and removable partial dentures; blowing out workpieces with steam and compressed air; and deflating casting rings. High sound pressure levels are also present in dental vibrators, polishing equipment, and sandblasters. The aim of this study was to Evaluation of the effect of noise production in dental technology laboratory on dental technician hearing capacity. METHODS: For this cross-sectional study, a total of 120 dental technicians were chosen. Otoscopic evaluation and the Weber test were used to establish if they had sensorineural or transmission hearing loss at 500 Hz, 1000 Hz, 2000 Hz, and 4000 Hz, respectively. Then an OAER (objective auditory evoked response) and PTA (clinical aurimeter) test were administered (Neurosoft, Russia). The whole procedure was carried out by an audiologist and an ENT specialist. RESULTS: The PTA results showed that the patient had mild hearing impairment overall, with the loss being more severe in the left ear than in the right. The OAE test results revealed that in-ear of the left side, 84.5% of subjects passed and 15.5% of subjects struggled and were referred to an ear specialist, whereas in the right ear, 82.7% of subjects passed and 17.3% struggled and were referred to an ear specialist. According to this study, in a right-handed study participant, the ear on the left side is more vulnerable than the right side. Differences in the mean hearing threshold at 4000 and 6000 Hz in the left ear were statistically significant in the groups of workers with eleven to fifteen years of practical experience and twenty-one to twenty-five years of practical experience, respectively (Minervini, et al. J Clin Med 12:2652, 2023). CONCLUSIONS: A statistically meaningful threshold shift from 4000 to 6000 Hz is observed as the working experience grows, and this is suggestive of sensorineural hearing impairment brought on by the noisy dental environment.

Self-Assessment of Hungarian Dentists Regarding Removable Partial Denture Design and Communication with the Dental Technician.

PURPOSE: To evaluate the extent to which dentists elaborate removable partial denture (RPD) design themselves and what they leave to the dental laboratory, as well as to assess the quality of information transferred to the technicians. MATERIALS AND METHODS: Data were collected using a questionnaire, and the responses of 211 dentists were analyzed. The categorized variables were analyzed using chi-square test and Fisher exact test. The significance level was considered as the standard P < .05. RESULTS: More than half (59.0%) of the dentists reported making an accurate, clear design for the dental technician before fabrication of the metal-framework RPD; 191 dentists (91.0%) specified the abutment teeth, 70.8% chose the type of clasps, and 60.7% gave instructions for the major connectors. The respondents largely took into account periodontal hygiene considerations (82.4%), and about one-third (37.7%) reported they were sending clear, precise instructions to the lab. The denture design was sent to the technician mainly (65.0%) in both drawing and text form. About half of the dentists (55.6%) gave only guidelines and left more details to be defined by the dental technician. Most dentists took responsibility in case of esthetic problems, irrespective of whether the dentist or technician prepared the denture design. CONCLUSION: Everyday practice concerning RPD design is far from the professional, legal, and ethical guidelines and rules relating to the duties and responsibilities of the dentist in relation to RPD design, and the situation therefore needs to be improved. Int J Prosthodont 2022;36:131-137. doi: 10.11607/ijp.7523.

Acceptance and experience of digital dental technology, burnout, job satisfaction, and turnover intention for Taiwanese dental technicians.

BACKGROUND: Digital dental technology (DDT) has progressed and been introduced to Taiwan in the recent years, gradually changing the industry ecology. Many studies have demonstrated that DDT is more accurate and faster than conventional dental technology. However, there is a paucity of research exploring dental technicians' perspectives on digital dental techniques, and their burnout, job satisfaction, and turnover intention. METHODS: This cross-sectional survey with convenience sampling was conducted at the conference venue of the Taiwan Association of Dental Technology to investigate the perspectives of dental technicians. We used the snowballing method in this study; two sampling methods were adopted, a convenience sampling of dental technicians to complete a survey, followed by asking the survey participants of the convenience sample to invite their colleagues to participate in the online survey. The survey questionnaire included questions on demographics, work-related information, acceptance and experiences of dental technicians toward DDT, occupational burnout, job satisfaction, and turnover intention. Regression models were used to determine the predictors of job satisfaction and determinants of turnover intention. RESULTS: In total, 341 valid questionnaires were obtained. Overall, the participants reported long working hours (95.5%), positive score on the DDT acceptance scale, moderate job satisfaction, higher personal burnout, and work burnout, along with lower over-commitment. Among them, 32.9% and 28.2% reported the intention to leave their organization and profession, respectively. The stepwise multiple regression model revealed that higher work burnout decreased job satisfaction, while higher DDT acceptance and position as employer increased job satisfaction. The binary logistic regression models revealed that geographical area of workplace, work burnout, and job satisfaction were significant predictors of turnover intentions. CONCLUSIONS: Many Taiwanese dental technicians reported turnover intentions and higher burnout. With the trend of digitalization in the dental industry, even though most dental technicians had a positive outlook toward DDT, its influence on job satisfaction appears limited. Retaining good and professional talents required of a dental technician is crucial, especially as Taiwan's dental care becomes increasingly specialized. Strategies for improving the work environment and occupational health of dental technicians should thus be the focus of future studies.

Education and licensure of dental technicians.

The Japanese Health, Labour, and Welfare Ministry in 2020 identified the following issues for training and recruitment of dental technicians: early involvement of students in dental practice and dental laboratory work, a curriculum in line with the times, and an extension of the years of training. This paper investigates the education and qualifications of dental technicians in other countries to discuss these issues. The survey method was to use the database PubMed to search the literature since 2001 using the keywords "dental technician," "education," and license" to collect literature related to the pre-graduate education of dental technicians. Information on educational institutions was also included in the survey. The results showed that the countries that introduced joint education between dental technicians and dentists into their educational programs, and the examinations and years of training required for each certification varied from country to country. The curriculum for dental technicians in Japan changed from a time-based to a credit-based system on April 1, 2018. The credit system is characterized by the possibility of each training institution actively engaging in flexible curriculum organization. Dental technician education programs in other countries can provide a valuable reference for each training institute to demonstrate its uniqueness.

Mixed-dust pneumoconiosis in a dental technician: a multidisciplinary diagnosis case report.

BACKGROUND: In dental laboratories, exposure to crystalline silica can occur during procedures that generate suspended mineral dusts, e.g. dispersion of mixing powders, removal of castings from molds grinding, polishing of castings and porcelain, and use of silica sand for blasting. There is also a large list of toxic agents (acrylic resins, polymeric materials, etc.) used to produce removable and fixed prostheses, but also impression materials and more. Using personal protective equipment and other aids reduces the exposure to these potentially harmful agents. CASE PRESENTATION: We report the case of a 42-year-old male dental technician who began to suffer from a dry cough and exertional dyspnea after approximately 15 years of work. The operations he conducted for his job resulted in the generation of crystalline silica, aluminum, chromium and titanium dust. The worker did not regularly wear personal protective equipment and some of the above operations were not carried out in closed circuit systems. The Chest X-ray showed diffused micronodules in the pulmonary interstitium of the upper-middle lobes, bilaterally, and a modest left basal pleural effusion. Simple spirometry showed small airway obstruction in its initial stage. High Resolution Computerized Tomography of the chest showed bilateral micronodulation of a miliariform type, with greater profusion to the upper lobes, also present in the visceral pleura, bilaterally. Histological examination showed aggregates of pigment-laden macrophages forming perivascular macules or arranged in a radial pattern around a core of sclerohyalinosis. Scanning Electron Microscopy and Energy Dispersive Spectrometry revealed several mineral particles, typically characterized by the presence of crystalline silica and metal aggregates. The environmental concentrations of total dust and its respirable fraction were all lower than the relative TLV-TWA-ACGIH, yet not negligible. CONCLUSIONS: The above findings and a multidisciplinary assessment led to the diagnosis of mixed dust pneumoconiosis s/q with 2/2 profusion of occupational origin. This diagnosis in a dental technician was supported for the first time in literature by environmental exposure analysis.

Determination of cytogenetic abnormalities in buccal mucosa of dental laboratory technicians.

This study aims to investigate the toxic effects of metals, which dental technicians are exposed to, on the oral mucosa cells in dental prosthesis laboratories (DPL). To monitor cytotoxic effects, mutations of pyknosis, Karyolysis Karyorrhexis, binucleus, micronucleus, and broken-egg were evaluated. Experimental group comprised of a total of 30 volunteer DPL employees from various DPLs, and 30 teachers and office workers were volunteered to be a part of the control group. Age range of DPL employees and whether they consume alcohol or smoke cigarettes were also considered as sub-variables. Peripheral smear technique was applied by taking samples from the oral mucosa of the experimental group and the control group. Anomalies determined between technicians and control group were statistically significant (p < .05). However, our findings revealed that the sub-variables (ie, age range, alcohol, and smoking) did not significantly affect the anomalies.

Avaliação dos impactos financeiros gerados pela pandemia da Covid-19 aos técnicos de prótese dentária no Brasil / Assessing the financial impacts of the COVID-19 pandemic on denture technicians in Brazil

Resumo Introdução a pandemia da Covid-19 e medidas de controle da sua expansão impactaram diferentes segmentos da economia, dentre eles os profissionais da Odontologia. Objetivo este trabalho analisou o impacto financeiro gerado pela pandemia da Covid-19 aos técnicos de prótese dentária (TPDs) no Brasil. Material e método por meio de um estudo transversal descritivo, aplicou-se aos TPDs do Brasil um questionário relacionado ao perfil sociodemográfico e profissional, impacto financeiro e medidas adotadas para minimizar seus efeitos. O questionário foi aplicado de forma on-line em redes sociais entre 27 de janeiro e 15 de fevereiro de 2021. Resultado demonstrou-se que 59,8% dos participantes eram do sexo masculino; 47,5% até 30 anos de idade e 57,3% com menos de 10 anos de prática. As medidas para contenção da propagação do coronavírus impactaram financeiramente 89,6% dos participantes; 72,0% interromperam totalmente seus trabalhos; 97,7% tiveram redução no faturamento; 98,2% tiveram mudança na rotina de trabalho; 94,8% tiveram aumento das despesas do laboratório no período; houve queda do faturamento para 41,2% entre 0% e 25,0% e para 36,3% entre 25,0% e 50,0%; 66,6% continuaram trabalhando durante a pandemia devido à sua situação financeira. Não pensaram em fechar seu laboratório de forma definitiva 71,8% dos participantes; 92,2% seguiram rotineiramente os cuidados de higienização e 21,6% fizeram uso das reservas financeiras. Conclusão os TPDs tiveram impacto financeiro durante o período da pandemia da Covid-19 causado principalmente pela diminuição da carga horária de trabalho, redução do faturamento e aumento do custo operacional devido à mudança na rotina de biossegurança.

Abstract Introduction the COVID-19 pandemic and measures to control its expansion impacted different segments of the economy, including dentistry professionals. Objective this study analyzed the financial impact of the COVID-19 pandemic on dental technicians in Brazil. Material and method this is a descriptive cross-sectional study with the application of a questionnaire of sociodemographic and professional profile, financial impact, and effect containment measures to dental technicians in Brazil. The questionnaire was applied online on social networks between January 27 and February 15, 2021. Result 59.8% of the participants were male, with 47.5% aged up to 30 years, and 57.3% with less than 10 years of practice. The measures to contain the spread of the coronavirus had a financial impact on 89.6% of the participants: 72.0% had their work completely interrupted, 97.7% had their billing reduced, 98.2% changed their work routine, and 94.8% had higher laboratory expenses in the period. Revenue decreased between 0% and 25.0% for 41.2% and between 25.0% and 50.0% for 36.3%. In addition, 66.6% continued working during the pandemic due to their financial situation. 71.8% of the participants did not consider closing their laboratory permanently, whereas 92.2% followed hygiene protocols routinely and 21.6% made use of their financial reserves. Conclusion dental technicians were financially impacted by the COVID-19 pandemic, mainly caused by fewer working hours, revenue reduction, and higher operating costs due to the change in the biosafety routine.

Early signs of pneumoconiosis in a dental technician in Italy: a case report.

BACKGROUND: Dental technicians are at high risk of pneumoconiosis, usually driven by inhalation of mixed dusts, including metals. An etiological diagnosis is not easy to be performed, particularly in advanced stages. CASE PRESENTATION: We describe the case of an early pneumoconiosis occurring in a 47-year-old dental technician who developed respiratory symptoms shortly after beginning work. She described the work environment as dusty and lacking relevant primary prevention tools. A chest CT showed multiple peripheral pseudonodular lesions in both lower lobes; bronchoalveolar lavage and bronchial aspirate evidenced numerous macrophages with reflective metal bodies included into the cytoplasm, that at scanning electron microscopy coupled to Energy Dispersive X-Ray Analysis resulted Zirconium and Aluminum, whereas Tungsten (W) was localized outside cells. End of shift urinary concentrations of W were substantially raised as compared to pre-shift (1.1 vs. 0.2 µg/L). CONCLUSIONS: We concluded for diagnosis of early work-related pneumoconiosis due to abnormal occupational exposure to metals. The case demonstrates the need also for dental professionals to comply with industrial hygiene standards and to be monitored by occupational health physicians.

Spatial distribution analysis of dentists, dental technicians, and dental therapists in Indonesia.

Background: Access to health services is needed around the world, from healthcare providers to doctors. One of the needs in public health is a system that is accessible for everyone, but, unequal distribution of healthcare provider and health workers, especially in dentistry fields is still a main problem in several countries, including Indonesia. The aim of this study is to analyze the spatial distribution of dentists, dental technicians, and dental therapists. Methods: This spatial analysis study was conducted after obtaining secondary data in Indonesia. All data were collected between September 1 st, 2020 and October 1 st, 2020 from open access sources of de-identified data. The data of dentists per area, dental technicians per area, and dental therapists per area were calculated for analysis. A spatial distribution map was prepared using the Quantum Geographic Information System (QGIS Desktop, version 3.10.6). Results: The results of this study found a ratio of dentists to members of the population in Indonesia of 1:17,105. The average number of dental technicians that work in the public health centers in each province (dental technicians per area) in Indonesia was calculated to be 0.13. The average number of dental therapists that work in the public health centers in each province (dental therapists per area) in Indonesia was calculated to be 0.40. This spatial autocorrelation illustrates that there is a relationship between values of dentists per area and dental therapists per area between provinces in Indonesia, and shows geographic clustering relationships or patterns that are grouped and have similar characteristics in adjacent locations. This spatial autocorrelation did not occur in the value of dental technicians. Conclusions: From this study we can conclude that there is an unequal distribution of dental personnel in Indonesia.

Private Laurence Arthur Coe DCM: dental technician to prisoner of war escapee.

Private Coe of the Army Dental Corps is thought to be the first soldier in the British Army to escape captivity in the Second World War and achieve the 'home run' back to the UK. He was captured near Dunkirk on 30 May 1940 by the German Army and was transported to camp Stalag XXA (Thorn) in Poland. He successfully escaped from the prisoner of war camp and made his way back to the United Kingdom. King George VI thought the escape a fine performance on the part of Private Coe and awarded him the Distinguished Conduct Medal.

Automatic Digital Design of the Occlusal Anatomy of Monolithic Zirconia Crowns Compared to Dental Technicians' Digital Waxing: A Controlled Clinical Trial.

PURPOSE: Reconstructing the occlusal morphology of posterior teeth in definitive dental prosthesis can be challenging. The use of the correlation technique enables replication of the information and occlusal anatomy of interim dental prostheses to the definitive ones. The purpose of this controlled clinical trial was to compare the static and dynamic contacts (SDC) of monolithic zirconia crowns designed with correlation and library techniques. MATERIAL AND METHODS: Twenty-four patients were included in the study for a total of 28 molars. For each abutment tooth, an interim crown was fabricated and two digital scans, with and without the interim crown in place were made. Two single crowns were designed using correlation and library techniques. Fifty-six monolithic zirconia crowns were milled. The interim and definitive crowns were evaluated intraorally for SDC by using a 24-µm-thick blue articulating foil. After removing the interim and definite crowns, extraoral photographs were taken to calculate the SDC area using software (ImageJ) and analyzed by the Kruskal-Wallis test. RESULTS: The average and ± standard deviation (SD) of area of the occlusal marks on interim crowns was 32.27 ± 3.45 mm2 . Definitive crowns designed by using the correlation technique had an area of 31.01 ± 3.73 mm2 ; the area in the library technique was 36.85 ± 5.78 mm2 . No statistically significant difference was found (p = 0.091) between the occlusal mark areas of the interim and definitive crowns designed by using the correlation technique. Whereas, there were significant differences between the areas of occlusal marks of the interim and definitive crowns designed by using the library technique, and between the areas of occlusal marks of definitive crowns designed by using the correlation and library techniques (p < 0.001). CONCLUSION: The average area of the SDC of monolithic zirconia crowns designed by using the correlation technique was similar to that of interim crowns. The library technique was less effective when replicating the SDC compared to the correlation technique.

Laboratory Trends for Removable Prosthodontics: A Comparison of Two Surveys.

PURPOSE:  The purpose of this survey was to assess dental laboratory technicians' perceptions of the quality of communication and techniques used when receiving removable prosthodontic cases. Additionally, responses were compared to a 2009 survey and changes in trends were evaluated. MATERIALS AND METHODS:    An eleven-question anonymous response survey was developed based on a 2009 survey that assessed dental laboratory technicians' perceptions.  The survey was distributed via Qualtrics to members of the National Association of Dental Laboratories (NADL) The survey included questions related to detail of instruction, quality of work received, design of the prosthesis, and type of articulator used.  Responses were compared to those received in 2009. RESULTS:  Fifty-two survey responses were received from dental laboratory technicians. Of these, 12 did not provide removable prosthodontics services and were excluded. The remaining 40 responses were analyzed. Of these, only 3.7% of the responding laboratory technicians reported receiving work authorizations from dentists that were complete enough to do their best work. While roughly half of the respondents (48.49%) expected a dentist to send a design for a cast partial denture framework, most respondents (72.5%) answered that they designed the majority of the partial denture frameworks they fabricated. The majority of respondents reported that complete denture impressions were not border molded in custom trays, and that most dentists did not rearrange or modify a wax setup for complete or partial dentures. These findings were consistent with the trends reported in the 2009 survey. CONCLUSIONS:  Most dental laboratory technicians answered that based on their selected techniques, dentists tend to complete clinical procedures that minimize patient chair time. While the surveyed technicians appeared satisfied with the quality of work they received, there was a consistent message that communication was frequently inadequate, limiting the technicians ability to fabricate their best work.

Should dental technicians play a greater role in the education of foundation dentists?

In some dental foundation training (DFT) practices, many generations of foundation dentists (FDs) have benefited from being encouraged to build close working relationships with dental technicians. Recent work suggests that new graduates may require additional support with the technical aspects of clinical work due to reduced clinical exposure in undergraduate education. This opinion paper therefore describes how involvement of technical colleagues in the education of FDs could provide important additional feedback on their work and draws upon the concept of 'spiral learning'. It goes on to argue that these opportunities are vital in building mutual respect and the ability to communicate effectively with members of the dental team. Ingraining this approach in FDs is important for their future careers and for the dental profession.

Allergic Contact Dermatitis due to Methacrylates in a Dental Technician - a Clinical Case.

INTRODUCTION: Methacrylate-based materials are used daily in dental practice. Specialized publications report these materials as allergens with a high sensitizing potential. AIM: To draw the attention of dental doctors and personnel to risk factors of developing occupational allergies. MATERIALS AND METHODS: History and dermatological status of the patient were taken and he was given an epicutaneous test. RESULTS: The allergy testing revealed a strong positive allergic reaction to methacrylates which persisted and was observed at 72 hours as well as on day 7. A diagnosis of allergic contact dermatitis was made on the basis of the patient's history, the clinical examination and the results of the epicutaneous test. CONCLUSION: The presented clinical case shows that early identification of the specific causative agents allows clinicians to take adequate measures and achieve results without having to use a medicine, and stop the progression of the occupational disease and the development of complications.

Occupational exposure of dental technicians to methyl methacrylate: Genotoxicity assessment.

Dental technicians may be chronically exposed to methyl methacrylate (MMA), used in the production of dental prostheses. We have studied whether occupational exposure to MMA affects genotoxicity biomarkers such as 8-OHdG formation, comet assay, and buccal micronucleus frequency. MMA exposure was assessed via ambient air analysis. Although no significant differences between exposed and non-exposed individuals were seen with respect to blood genotoxicity measurements, we found a higher level of buccal-cell anomalies in the exposed group.